Convert Intraoral Scans into Dental Models

Convert Intraoral Scans into Dental Models

Convert Intraoral Scans Into Solid Dental Models


1. Import

Import the scan model into UNIZ Dental software

2. Set base height

3. Set cutting plane

  1. Three Points: Pick three points with the left-click on surface to determine the cutting plane.
  1. Or the horizontal plane. But the necessary action is using manipulator to rotate the scan model and orient the occlusal surface up.

4. Trim

Click 'Repair' button, or left click on the surface of model to trim extraneous data, and add a base with base-height.

Convert Intraoral Scans Into Hollow Dental Models


1. Import

Import the scan model into UNIZ Dental software

2. Set base height

3. Set cutting plane

  1. Three Points: Pick three points with left-click on surface to determine the cutting plane.
  1. Or the horizontal plane: But the necessary action is using manipulator to rotate the scan model and orient the occlusal surface up.

4. Trim and Add Base

Click 'Repair' button, or left click on the surface of model to trim extraneous data, and add a base with base-height.

5. Hollow

Set the wall thickness and hollow out the solid model.

6. Split

Split the model at a height that slightly higher than wall thickness, and delete the lower extraneous part.

7. Hole

Dig a hole at the bottom of the model to prevent cupping.

8. Label (Optional)

Digitally text on dental models, to get ready for 3D printing.

    • Related Articles

    • Hollowing models

      The information in this article only applies to UNIZ Dental V2.5.1.9, other versions may have some different user interfaces and operations. When do we need to hollow the model Depending on the needs of the user, hollowing a model is necessary or ...
    • How to Print Dental Model

      Print Dental Model How to print solid Dental Model There are two ways for layout: Directly on the build platform (horizontal) and Near (vertical). Horizontal 1. Import Import the dental model files into UNIZ Dental. 2. Orient and Layout Using ...
    • Repair Dental Scan Model

      Press button【Repair Scan】in the top toolbar to pop up the "Repair Scan" box. The repair scan tool allows for repairing the intraoral models. It exceeds the functionality of the basic repair tool by adding a basing function, making your model much ...
    • Hollow a Model

      Hollow Press Hollow buttom in the top toolbar to pop up the "Hollow" box. The excessive waste of resin in printing solid model is avoided in this function, and the possibility of printing failure is avoided because of the weight. Thickness: refers to ...
    • Opening a Model in UNIZ Dental

      This article applies to NBEE, SLASH 2 PLUS Load Model To load one or more 3D models, you may either drag-and-drop into the 3D viewer, click button【Open】, or click【File】->【Open】on the menu. File format supported: STL, OBJ, AMF, 3MF. The UNIZ Dental ...