Hollow a Model

Hollow

1. Press Hollow buttom in the top toolbar to pop up the "Hollow" box.
   

The excessive waste of resin in printing solid model is avoided in this function, and the possibility of printing failure is avoided because of the weight.

1. Thickness: refers to the thickness of the outer diameter minus the inner diameter of the model after the interior hollowing out.
   

1. Adjust the thickness, and then click "Hollow" to carry out the internal hollowing operation of the selected model automatically. Use the "Slice Viewer" to view the internal hollowing condition.
   

• Related Articles

• How to Print Dental Model

  Print Dental Model How to print solid Dental Model There are two ways for layout: Directly on the build platform (horizontal) and Near (vertical). Horizontal 1. Import Import the dental model files into UNIZ Dental. 2. Orient and Layout Using ...

• Convert Intraoral Scans into Dental Models

  Convert Intraoral Scans Into Solid Dental Models 1. Import Import the scan model into UNIZ Dental software 2. Set base height 3. Set cutting plane Three Points: Pick three points with the left-click on surface to determine the cutting plane. Or the ...

• Label on Model

  Press button【Label】in the top toolbar to pop up the "Label" box. This function is useful when you planning to print dozens of instances from the same 3D model but using different parameters or resins or any variate that could possibly causes ...

• Split a Model

  Press button【Split】in the top toolbar to pop up the "Split" box. The split tool that allows you to split a model along a single plane, reducing material from the base or cutting off unneeded parts of your model. Method1: Adjust the position and ...

• Repair Dental Scan Model

  Press button【Repair Scan】in the top toolbar to pop up the "Repair Scan" box. The repair scan tool allows for repairing the intraoral models. It exceeds the functionality of the basic repair tool by adding a basing function, making your model much ...