How to get SN for NBEE?

How to get SN for NBEE?

What is SN?

SN refers to the printer's serial number (Serial Number). This serial number is a unique identifier assigned to each printer by UNIZ factory.

What is SN used for?

The serial number can be used to verify the device's warranty status and support eligibility. We can identify the device model,original data, purchase date and warranty period. Based on the serial number, so as to provide customers with corresponding technical support and repair services.

Where can you find SN on NBEE?

You can find SN directly in these places, or scan the QR code to get it quickly.
1.On the wooden package;

2.On the paper package;

3.On the warranty card;


4.On the inside of the NBEE front cover;

5.In the setting interface.

Conclusion

The printer's outer packaging contains important warranty information, serial numbers, and other device identification. This information may be needed if the printer needs repair or if you contact UNIZ for support. Therefore, please keep the printer wooden box and carton properly.






    • Related Articles

    • Maintenance tips—packing and package precautions

      This article applies to NBEE, NBEE H, NBEE J printers. Why is this important? Understanding and adhering to these precautions for receiving and transporting the printer is crucial to prevent damage and ensure safe handling. Neglecting these ...

    • NBEE build platform out of step

      Symptoms The build platform vibrates slightly when it moves to the bottom. The printing process can start, but the screen will not light up and the printing process cannot be continued. Possible Causes The limit switch is faulty and cannot be ...

    • NBEE‘s touch screen loop logo cannot enter the standby interface

      Symptoms When performing the power-on operation, the printer's touch screen cycles through the UNIZ logo and cannot enter the Standby interface. At the same time, the sound of the fan continuing to rotate can be heard on the back of the printer. ...

    • Receiving and Unboxing your NBEE

      OPEN IT UP ① Remove the four handle locks around the bottom of the box. ② Use the holders to lift the upper box up, and leave it to the side. REMOVE THE FOAM PACKAGING ③ Remove front and rear foam. ④ Remove top foam. TAKE THE PRINTER OUT ⑤ Remove the ...

    • Introduction to Crown Build Platform (NBEE)

      Description The Mini Build Platform is specifically designed for applications such as temporary crowns, permanent crowns, and dental bridges. This platform is compatible with the NBEE series 3D printers. The base plate is made of ceramic material, ...