There are two ways for layout: Directly on the build platform (horizontal) and Near (vertical).
Horizontal
1. Import
Import the dental model files into UNIZ Dental.
2. Orient and Layout
Using Horizontal Arrange function to position the parts
directly on the build platform, realize the model layout quickly.
3. Slice
Select "zDENTAL Model Sand" item from Profiles
List on the right Tool bar, Click "Slice" button to finish slice.
4. Print
Send the slice file to your printers via LAN or Using U
disk to copy slice files to your printers. Start printing by selecting the
print job on the printer's touchscreen.
Vertical
1. Import
Import the dental model files into UNIZ Dental
2. Orient and Layout
Using Vertical Arrange function to rotate the models to
near vertical orientation and realize models' layout quickly.
3. Generate Supports
Using the UNIZ Dental auto-generation function to
generate supports of the selected models.Use the manual support editing
function to add, edit or remove supports as needed.
4. Slice
Select "zDENTAL Model Sand" item from Profiles
List on the right Tool bar,Click "Slice" button to finish slice.
5. Print
Send the slice file to NBEE or SLASH 2 PLUS via LAN or
Using U disk to copy slice files to your printers.
Start printing by selecting the print job on the
printer's touch screen.
How to print Hollow Dental Model
1.Import
Import the dental model files into UNIZ Dental.
2. Orient and Layout
Using Horizontal Arrange function to position the parts
directly on the build platform, and make sure they are not overlapping each
other.
3.Slice
Select "zDENTAL Model Sand" item from Profiles
List on the right Tool bar,Click "Slice" button to finish slice.
4.Print
Send the slice file to NBEE or SLASH 2 PLUS via LAN or
Using U disk to copy slice files to your printers.
Start printing by selecting the print job on the
printer's touchscreen.
Hollow Press Hollow buttom in the top toolbar to pop up the "Hollow" box. The excessive waste of resin in printing solid model is avoided in this function, and the possibility of printing failure is avoided because of the weight. Thickness: refers to ...
Convert Intraoral Scans Into Solid Dental Models 1. Import Import the scan model into UNIZ Dental software 2. Set base height 3. Set cutting plane Three Points: Pick three points with the left-click on surface to determine the cutting plane. Or the ...
Press button【Repair Scan】in the top toolbar to pop up the "Repair Scan" box. The repair scan tool allows for repairing the intraoral models. It exceeds the functionality of the basic repair tool by adding a basing function, making your model much ...
The information in this article only applies to UNIZ Dental V2.5.1.9, other versions may have some different user interfaces and operations. When do we need to hollow the model Depending on the needs of the user, hollowing a model is necessary or ...
Print Surgical Guides How to print Surgical Guides 1. Import Import the Surgical Guide model files into UNIZ Dental 2. Orient Use the manipulator to rotate the Surgical Guide model and orient parts horizontally with the intaglio surface facing away ...