Introduction to Crown Build Platform (NBEE)

Introduction to Crown Build Platform (NBEE)

Description

The Mini Build Platform is specifically designed for applications such as temporary crowns, permanent crowns, and dental bridges. This platform is compatible with the NBEE series 3D printers. The base plate is made of ceramic material, which offers high hardness and excellent wear resistance, meeting the needs of dental professionals who use ceramic resins for printing.

When you select the C&B application in UNIZ Dental software, the dimensions in the edit interface will automatically switch to 60×60×180mm to accommodate the build size of Mini Build Platform.

It is recommended to pair the Mini Resin Tank with the Mini Build Platform to save resin and achieve a better user experience.

Appearance and build size



Zero and leveling

1. Install the Mini Build Platform and turn the screw to lock it firmly. ensure that there are no residues or foreign objects on the bottom surface of the platform.

2. Click Tools/Zero&Leveling, loosen the four screws with M5 Hexagon Wrench by turning counter-clockwise.






3. Remove the Resin Tank and ensure that there are no residues or foreign objects on the bottom surface of the surface of LCD screen. Then click CONFIRM, the Build Platform will move down. Wait a moment until it stop.




4. Once the Build Platform stopped moving and pressed against the LCD screen, tighten the four screws with M5 Hexagon Wrench clock wisely. Then click CONFIRM.  

NotesNote: Stop turning the screw once you feel it has been tightened. Applying too much force may affect the accuracy of the leveling.

5. Choose the 50mm option and click the arrow. Firmly tighten the four M5 screws again to ensure the leveling position does not change during the printing process. 

6. Zero and Leveling is finished. But due to the "overpressure" phenomenon that occurs during the leveling process, it is recommended to adjust the Z-axis offset to 0.4~0.5mm to minimize the impact on the Z-axis dimensions of the printed model before starting the print.

NotesNote: UNIZ Dental software version is at least V2.6.1.12.



    • Related Articles

    • Introduction to Mini Build Platform (UBEE)

      Description The Mini Build Platform is specifically designed for applications such as temporary crowns, permanent crowns, and dental bridges. This platform is compatible with the UBEE series 3D printers. The base plate is made of ceramic material, ...

    • Maintenance tips—build platform maintenance

      This article applies to NBEE , NBEE H , NBEE D. Why maintenance? The build platform is crucial in 3D printers because it supports and secures printing materials, directly affecting printing accuracy and quality. Regular maintenance ensures print ...

    • NBEE build platform out of step

      Symptoms The build platform vibrates slightly when it moves to the bottom. The printing process can start, but the screen will not light up and the printing process cannot be continued. Possible Causes The limit switch is faulty and cannot be ...

    • Build platform only moves up during printing

      This article applies to NBEE, NBEE D, NBEE J, NBEE H. Symptoms During the printing process, the build platform does not move downward, but keeps moving upward. Possible Causes During the printing process, the resin spilled on the limit switch, ...

    • What is the build volume of the NBEE & NBEE H?

      This article applies to FAQ The build volume of the NBEE is 19.2× 12× 18 cm (7.5 × 4.7 × 7.1 in). The NBEE H uses the same build platform, but can lift it slightly higher, for a build volume of 19.2× 12× 38 cm (7.5 × 4.7 × 15 in). For full details, ...