NBEE printer rear casing (input) power wiring diagram and precautions

This article applies to NBEE, NBEE H, NBEE J.

When do I need to handle the power diagram?

If you accidentally disconnect the power cord after disassembling the rear casing, you can reconnect it according to the wiring diagram below.

Note: Please turn off the power and unplug the power cord before operation to avoid electric shock.

1. Please cut off the power and unplug the power cord before removing rear casing to avoid electricity shock.

2. Before turning on the printer, check whether the wires are plugged in correctly.

Related Articles
Screw Positions on NBEE casing
This article applies to NBEE, NBEE H, NBEE J. Why do you need to know the screw positions on NBEE casings? After disassembling and repairing the printer, you need to install the NBEE casing back to protect the internal structure. Through this ...
How to replace the screen cable
This article applies to NBEE , NBEE D , NBEE H. Description The LCD screen cable refers to the cable that connects the liquid crystal display screen (LCD screen) to the main control board (HDMI board). This cable usually is responsible for ...
Maintenance tips and precautions summary
This article applies to NBEE, NBEE H, NBEE J, and NBEE D printers. Maintenance summary Content (Click to View) Description Packaging Usage and Precautions Methods and precautions for receiving and transporting printer packaging. Appearance ...
How to drain coolant from NBEE
When does coolant need to be drained When the coolant becomes murky and no longer transparent, it is necessary to drain the old coolant, clean the cooling system and fill in new coolant； When the cooling board is cracked or crushed, necessitating ...
Set Printer Nickname for NBEE
1. Go to the SETTING page and click SYSTEM button 2. Click the Printer’s name (marked in red box below) to the next step 3. Click the bar in red box marked below, and click the DEL button to delete the current nickname then input a new one. Click OK ...