Label on Model

Label on Model

Press button【Label】in the top toolbar to pop up the "Label" box.



This function is useful when you planning to print dozens of instances from the same 3D model but using different parameters or resins or any variate that could possibly causes differences on printing results.

You can mark your 3D Models by adding labels on their surface, so you won't mixed up with printing results those are similar to each other.
  1. Choosing a font
  2. Input Thickness, Size
  3. Check bulge or sunken of the text, enter the text to mark
  4. Move the mouse on model to preview label position
  5. And then click left mouse on the model to generate the label

    • Related Articles

    • How to Print Dental Model

      Print Dental Model How to print solid Dental Model There are two ways for layout: Directly on the build platform (horizontal) and Near (vertical). Horizontal 1. Import Import the dental model files into UNIZ Dental. 2. Orient and Layout Using ...

    • Convert Intraoral Scans into Dental Models

      Convert Intraoral Scans Into Solid Dental Models 1. Import Import the scan model into UNIZ Dental software 2. Set base height 3. Set cutting plane Three Points: Pick three points with the left-click on surface to determine the cutting plane. Or the ...

    • Add a New Profile in UNIZ Dental

       Add a New Profile in UNIZ Dental This article applies to NBEE, SLASH 2 PLUS 1. Select a printer type and select a printer. 2. Open 【Profile Settings】Menu. 3. Press 【New】to add a customized printing parameter. Modify the corresponding value on the ...

    • Supporting a Model in UNIZ Dental

      The principle of 3D printing is to print layer by layer If the part of the model is suspended, or the printed part couldn’t support the unprinted part, users need to add support. Generate Supports Pressing icon will open following sub menu. There are ...

    • Hollow a Model

      Hollow Press Hollow buttom in the top toolbar to pop up the "Hollow" box. The excessive waste of resin in printing solid model is avoided in this function, and the possibility of printing failure is avoided because of the weight. Thickness: refers to ...