Network Settings for NBEE

Network Settings for NBEE

Network Settings

1. LAN

You could connect the printer with your router via Ethernet cable.
  1. Go the SETTINGS menu.
  2. Click LAN button.
  3. Set to AUTO mode on. The printer will get IP address automatically.
  4. Click CONNECT.
  5. If you set AUTO mode off, you need to type IP address, Netmask, Gateway, DNS manually. Then click CONNECT. When you could see the Ethernet icon at right top of interface, it means the printer in connected with network.

2. SET WIFI

Please insert the USB-WiFi sent with the printer into the USB port on the left side of printer.
You could connect the printer with your router via Wi-Fi.
  1. Go the SETTINGS menu.
  2. Click WIFI/SSID, there will be a list of available Wi-Fi.
  3. Choose the Wi-Fi network and enter password.
  4. Click CONFIRM. When you see the IP address is shown, it means the printer is connected well with Wi-Fi network. There should be a Wi-Fi icon appearing at right top of this interface.