New features in UNIZ Dental version 2.6.1.12

New features in UNIZ Dental version 2.6.1.12

UNIZ Dental software has supported upgrading to version 2.6.1.12. This major upgrade includes five exciting and important features that will add more convenience and fun to the printing process.

1.Collision detection function

This function is used to detect whether the models overlap and display the overlapping models in red. When the models are displayed in red, the problem can be solved by increasing the gap between the models.
Enable or disable the function

Normal state
Abnormal state

2.Cavity detection function

This function is used to mark the cavity area with yellow line. When yellow lines appear, the problem can be solved by drilling holes at the side bottom of the model.
Enable or disable the function

Normal state
Abnormal state

3.Two types of support addition modes

It provides two different modes for adding the supports, The simple mode are the default settings which allow automatically generate supports for the matched indication and cannot be manually modified; However, the advanced mode can be manually adjusted by professional technicians according to the actual situation.
Switch modes

Simple mode vs. advanced mode

4.One-click printing function

The preset setting which allow user to perform quick slicing a batch of model by using the auto rotation placement strategy, support parameters, and slicing parameters.
Notes
The function is not supported in the "scan to model" indication.
Enable or disable the function

5.Multi-segment parameters

This function is mainly applicable to UBEE.
Added new middle layer parameters and Z offset

Conclusion

By studying the above, you will have a basic grasp of the new software. If you have any questions, please contact support@uniz.com.


    • Related Articles

    • Adding new profile

      The information in this article only applies to UNIZ Dental V2.5.1.9, other versions may have some different user interfaces and operations. When we need to add new profile to UNIZ Dental V2 When you want to use a third-party resin, or make changes ...
    • How do I update Uniz Dental?

      This article applies to FAQ To automatically check for updates in Dental Uniz Dental automatically checks for updates daily upon launch if the computer is connected to the internet. When updates are available, Uniz Dental prompts you with the option ...
    • Uniz Software version overview

      Summary The purpose of this article is to facilitate our users in locating historical software versions. This article will be continuously updated based on the installation packages provided by the official source. If you cannot find the ...
    • UNIZ Dental V2 support parameter diagram

      Summary In order to provide users with greater convenience, we have upgraded the UNIZ dental software in version V2.5.0.8. After this update, the support parameters have transitioned from being freely adjustable to simplified buttons. Now, users can ...
    • Manually Adding a Printer to UNIZ Dental

      Manually Adding a Printer to UNIZ Dental This article applies to NBEE, SLASH 2 PLUS 1.  You need to obtain the printer's IP address on the printer's touch screen. 2.  Select Printers Type and open the printer settings dialog box. 3. Click the 【New】 ...