Repair a Model
If the 3D model is defective, an exclamation point will appear in front of the item in Model List view.
- Press Repair【Repair】button in the top toolbar to pop up the "Repair" box.
- Select a defective model first, then click “Repair Model” button, the software will automatically fix the topology exception.
- If Only small holes is checked, the repair speed will be greatly improved when there are large holes that cannot be repaired.
Related Articles
Repair Dental Scan Model
Press button【Repair Scan】in the top toolbar to pop up the "Repair Scan" box. The repair scan tool allows for repairing the intraoral models. It exceeds the functionality of the basic repair tool by adding a basing function, making your model much ...Dig Hole on Model
Press button【Hole】in the top toolbar to pop up the "Hole" box. The Hole function is more likely to be used with the hollow function. The holes can let the air and excess resin out. Shape: The shape of the hole Size: Diameter of the hole Depth: The ...Copying a Model in UNIZ Dental
Copying a Model in UNIZ Dental In the state of Duplicate, the software supports two ways to duplicate the model: Option 1: Sets the Number of copies in the form Click the Duplicate button, then the number set by the user will be copied. Option 2: ...Repairing models
The information in this article only applies to UNIZ Dental V2.5.1.9, other versions may have some different user interfaces and operations. When do we need to repair the model? When a yellow exclamation mark appears next to the model name it means ...Hollowing models
The information in this article only applies to UNIZ Dental V2.5.1.9, other versions may have some different user interfaces and operations. When do we need to hollow the model Depending on the needs of the user, hollowing a model is necessary or ...