Resin tank peeling attention

This article applies to NBEE, NBEE H.

Symptoms

Black flakes have fallen from the frame of the resin tank into the resin tank. When wiping the frame with a tissue, the black paint will be rubbed off.

Common causes

Oxidation process risk: After long-term immersion in the resin, some small molecular components in the resin penetrate into the black oxide film, causing  to the oxide film easy to fall off when wiped. 

Clearance and solution

1. We modified the oxidation process and changed the oxide frame to silver. The silver oxide frame is much more corrosion-resistant than the black oxide frame and has stronger resistance to resin immersion. 
   
2. We apologize for the inconvenience caused to customer regarding the black resin tank with peeling paint. We promise that for any resin tank with peeling paint problem within 3 months from the date of receipt it, we will reissue the upgraded silver resin tank frame (Only frame, need to replace the film by customer) to the customer free of charge. If the resin rank has been used for more than 3 months, it is considered normal wear and tear and we will not reissue it.

• Related Articles

• Maintenance tips—resin tank

  This article applies to NBEE, NBEE H, NBEE D. Product introduction Currently, UNIZ has launched two versions of resin tanks, black and silver, with the same size and NFEP single-layer film, which has the characteristics of high uniformity, strong ...

• How To Change Resin Tank Film

  The resin tank film is transparent. Before installing the film, please remember to remove the protective films from both sides of the resin tank film. Steps Make sure the Resin Tank is wiped clean inside and out, and put it on a clean table. Flip the ...

• How to deal with the resin on the LCD screen

  Possible Causes Accidentally dripping resin onto the LCD screen when moving the build platform or resin tank. The damage of the resin tank led to the resin seep onto the LCD screen during the printing process. In daily use, please keep the LCD screen ...

• Maintenance tips—resin tips and precautions

  This article applies to NBEE, NBEE H, NBEE J, and NBEE D printers Why is it important to know this? Understanding and adhering to resin-related precautions are essential to properly store, use, and dispose of resin, safeguarding your equipment, the ...

• Exposure Cleaning

  This article applies to NBEE, NBEE H, NBEE D. Introduction to the function Exposure cleaning is a tool to facility the cleaning of the residues left in the resin tank like debris and/or cured resins. the operator to When printing fails, there may be ...