Set Printer Nickname for NEBB

Set Printer Nickname for NBEE

1. Go to the SETTING page and click SYSTEM button
2. Click the Printer’s name (marked in red box below) to the next step

3. Click the bar in red box marked below, and click the DEL button to delete the current nickname then input a new one. Click OK button after finished input, it will move to the next step



Note: The nickname can only be combined with capital letters, lower case letters, and numbers
4. Click CONFIRM button, it will automatically come back to the SETTING page, the name modification is done

    • Related Articles

    • Quick Start Guide for NBEE

      SET-UP YOUR PRINTER A. Take accessories out. 1. Remove the bottom rear cover. 2. Remove the packing strap and take out the accessory boxes. B. Position the printer. 1. Place the printer on the ground. 2. Adjust the four leveling screws under the ...

    • Spare parts images and official names

      This article applies to NBEE, NBEE H, NBEE J. Why need to know this? Acquiring the knowledge of the pictures of the accessories as well as their English official names can allow the sales and after-sales personnel to gain a deeper understanding of ...

    • How to replenish coolant in NBEE

      Preparation before operation Prepare items: ①M4 hexagonal wrench ②UNIZ brand coolant ③Nitrile gloves Operation steps Turn off the printer and unplug the power cord; Remove the rear casing of the printer; There are wires connected to the rear casing. ...

    • NBEE-Ambient Light Brightness Setting Process-EN

      NBEE Printer Atmosphere Lamp—Brightness Setting Process *For NBEE Printer Only 1. Enter the Factory Interface After booting, you can see the Standby interface of the touch screen.  Go click the green origin in the upper left corner (shown in the red ...

    • NBEE printer rear casing (input) power wiring diagram and precautions

      This article applies to NBEE, NBEE H, NBEE J. When do I need to handle the power diagram? If you accidentally disconnect the power cord after disassembling the rear casing, you can reconnect it according to the wiring diagram below. Note: Please turn ...