What is the build volume of the NBEE & NBEE H

What is the build volume of the NBEE & NBEE H?

This article applies to FAQ

The build volume of the NBEE is 19.2× 12× 18 cm (7.5 × 4.7 × 7.1 in).

The NBEE H uses the same build platform, but can lift it slightly higher, for a build volume of 19.2× 12× 38 cm (7.5 × 4.7 × 15 in).

For full details, refer to the tech specs page.

    • Related Articles

    • How fast does the NBEE or NBEE H print?

      This article applies to FAQ The short answer is that it depends on the printing height, resin type, and layer thickness of the model. Parts printed with thinner layers capture finer detail but take longer to print. As the world fastest printer so ...

    • What is the difference between the NBEE and the NBEE H?

      Mian difference: NBEE NBEE H Molding volume 192 x 120 x 180 mm 192 x 120 x 380 mm Software UNIZ Dental UNIZ Industry Application fields Dentistry, jewelry Industry The NBEE and NBEE H use the same Low Force Stereolithography (LFS) technology to ...

    • Maintenance tips—build platform maintenance

      This article applies to NBEE , NBEE H , NBEE D. Why maintenance? The build platform is crucial in 3D printers because it supports and secures printing materials, directly affecting printing accuracy and quality. Regular maintenance ensures print ...

    • NBEE build platform out of step

      Symptoms The build platform vibrates slightly when it moves to the bottom. The printing process can start, but the screen will not light up and the printing process cannot be continued. Possible Causes The limit switch is faulty and cannot be ...

    • NBEE build platform cannot lift up during printing while printing process continues

      This article applies to NBEE, NBEE D, NBEE J, NBEE H. Symptoms After starting the print, the build platform can move down until into the resin tank, but after few seconds of curing, when it tries to lift up, the motor trips (you can hear the sound of ...