Starting a Print

Starting a Print

  1. Insert a Flash Drive to the USB port at right side of printer.
  2. Click PRINT menu, then click USB DISK icon. You will see a list of slice files in flash drive.
  3. Choose and click a slice file you want to print and click PRINT button, the printer will step into normal printing program.

In this interface, you may check the preview and printing parameters of the print. Also you may pause/resume or stop the printing program by click the buttons at bottom.

The last file printed on the printer will be shown in the MOST RECENT interface. You may print a model second time very expediently with this function.


SLASH 2 PLUS can receive the sliced files from PC via Wi-Fi and store in local memory. You can find the file in LOCAL menu (Note: it can only memory one slice file). Choose the file in this interface and click PRINT button to start printing.

    • Related Articles

    • How to Print Dental Model

      Print Dental Model How to print solid Dental Model There are two ways for layout: Directly on the build platform (horizontal) and Near (vertical). Horizontal 1. Import Import the dental model files into UNIZ Dental. 2. Orient and Layout Using ...

    • How to print Surgical Guides

      Print Surgical Guides How to print Surgical Guides   1. Import Import the Surgical Guide model files into UNIZ Dental 2. Orient Use the manipulator to rotate the Surgical Guide model and orient parts horizontally with the intaglio surface facing away ...

    • Sending a Print Job from UNIZ Dental to a Printer

      Send Slice UNIZ Dental provide two ways such as U disk and LAN to transfer slices to selected printer. Based on U Disk After the slice is finished, click the【Save】button to save the slicing file locally to the computer, and use the U disk to copy it ...

    • Designing with UNIZ Dental in mind

      Designing with UNIZ Dental in Mind This article applies to NBEE, SLASH 2 PLUS A model’s design directly influences how it prints. Understanding which features require support, the limitations of the build volume, and whether there is a risk of ...

    • Label on Model

      Press button【Label】in the top toolbar to pop up the "Label" box. This function is useful when you planning to print dozens of instances from the same 3D model but using different parameters or resins or any variate that could possibly causes ...