Split a Model

Split a Model

Press button【Split】in the top toolbar to pop up the "Split" box.

The split tool that allows you to split a model along a single plane, reducing material from the base or cutting off unneeded parts of your model.



Method1:
  1. Adjust the position and rotate of the cutting plane in the "Split" box.
  2. Click the "Cut" button and the selected model will be split.
Method2:
  1. Adjust the rotate of the cutting plane in the "Split" box.
  2. Move the mouse to adjust the position of the cutting plane
  3. and Click the left mouse button to confirm the split.


    • Related Articles

    • Convert Intraoral Scans into Dental Models

      Convert Intraoral Scans Into Solid Dental Models 1. Import Import the scan model into UNIZ Dental software 2. Set base height 3. Set cutting plane Three Points: Pick three points with the left-click on surface to determine the cutting plane. Or the ...
    • Hollow a Model

      Hollow Press Hollow buttom in the top toolbar to pop up the "Hollow" box. The excessive waste of resin in printing solid model is avoided in this function, and the possibility of printing failure is avoided because of the weight. Thickness: refers to ...
    • Repair Dental Scan Model

      Press button【Repair Scan】in the top toolbar to pop up the "Repair Scan" box. The repair scan tool allows for repairing the intraoral models. It exceeds the functionality of the basic repair tool by adding a basing function, making your model much ...
    • Label on Model

      Press button【Label】in the top toolbar to pop up the "Label" box. This function is useful when you planning to print dozens of instances from the same 3D model but using different parameters or resins or any variate that could possibly causes ...
    • Repair a Model

      If the 3D model is defective, an exclamation point will appear in front of the item in Model List view. Press Repair【Repair】button  in the top toolbar to pop up the "Repair" box. Select a defective model first, then click “Repair Model” button, the ...